UNIVERGE SV8100 Issue 11.0Alarm Reports 2 - 29Alarm ReportsDescriptionThe UNIVERGE SV8100 system logs various errors and reports information about the operation thatcan be used to determine the cause of a problem. The system can indicate several errors on themultiline telephone display, output to a USB stick on the CD-CP00-US, or be downloaded in PCPro. Thereport data also can be sent via email.Alarm ReportThe Alarm Reports indicate: System start-up/upgrade date and time Blade communication error with date and time and the restoration date and time Date and time a blade was removed from the system Date and time an extension was disconnected from the system Date and time of any system data changeEnhancementsWhen attempting a call requiring an IP to TDM conversion and no DSP resource is available, thesystem displays a message on the multiline terminal and can generate an alarm via the Alarm Report(system software Version 3000 or higher required).With Version 5000 or higher CPU software, the Alarm Reports feature has been enhanced to includean alarm for IP duplication. With Version 4000 or lower CPU software, the SV8100 had no alarmfunction for an IP address duplication. With this enhancement, the SV8100 is able to detect anotherdevice on the same subnet having an IP address that conflicts with those assigned to the CPU, IPLA/IPLB, and DSP resources to make troubleshooting easy when IP packets are not sent.With Version 7000 or higher software, the SV8100 can be configured to send an email notification ofa system event that causes a reset and DIMLast and DIMDump files to be created. The system canalso be configured to email the DIMLast and DIMDump text files by using the SMTP email settings inthe 47-18-xx programs and mounting a PZ-ME50-US to the CCPU. This enhancement requires theV7000 Enhancement License (0036) and Maintenance License (0043).
