Issue 2.0 UNIVERGE SV81004 - 30 Installing the SV8100 BladesDepending on the compact flash card used, the voice mail canprovide:3.3.2 InstallationTo install a PZ-VM21 on the CD-CP00-US:1. Four plastic spacers are included with the PZ-VM21. Install theplastic spacers on the PZ-VM21. Make sure to attach thespacers so that they extend out on the side of the daughterboard which has the CN1 connector. Refer to Figure 4-11Installing the PZ-VM21 on page 4-31.2. For installation on the CD-CP00-US blade refer to Figure 4-7CD-CP00-US Blade with Daughter Boards Installed on page4-17.3. Position the PZ-VM21 CN1 connector over the CN4 connectoron the CD-CP00-US blade . Press the blade and boardtogether, ensuring the plastic spacers lock in place.Table 4-12 CompactFlash Voice Mail SpecificationsUNIVERGE SV8100 VM8000 InMail Part Numbers and CapacitiesP/N 670831 UNIVERGE SV8100 VM8000 InMail 512M Drive (1) 32-hour CompactFlash Card with software.P/N 670784 UNIVERGE SV8100 VM8000 InMail 8-Port LicenseP/N 670872 UNIVERGE SV8100 VM8000 InMail 2-Port LicenseP/N 670873 UNIVERGE SV8100 VM8000 InMail 4-Port LicenseP/N 670874 Language LicenseP/N 670103 (1) Daughter Board Interface for InMail CF.Mailboxes Station Mailboxes = 512Routing Mailboxes = 32Group Mailboxes = 32Total Mailboxes = 576Do not remove or install the CD-CP00-US withthe power on.
