UNIVERGE SV8100 Issue 2.0System Hardware Manual 5 - 434.8.3 Configuring the Digital Telephone for the Ten Key Kit1. With the telephone not plugged in and the handset on-hook,press the 4 and 6 buttons on the numbered keypad andconnect the telephone cable. This places the telephone into Service Class Read/Write (R/W) mode.The Message Waiting LED should be On.2. Press 2 on the numbered keypad to enter the Button Kit mode. The Message Waiting LED should flash.3. Follow the directions below for the type of keypad installed:4. Press line key 2, 8, 14 or 20 to save to memory. The displaychanges back to the Service Class R/W mode and the RedMessage Waiting (MW) LED is On.5. Press Exit to return the telephone to idle.Table 5-11 Numbered Keypad TypeNumbered Keypad Type Push LED Indication(2D Style Terminal)Japan Value 01 Line 1 LED on RedModel A Telephone 02 Line 2 LED on RedModel B UX5000 Telephone 03 Line 1 and 2 LED on RedCall Center 04 Line 1 LED on GreenHotel-1 05 Line 2 LED on GreenHotel-2 06 Line 1 and 2 LED on GreenRetirement Home 07 Line 1 LED flashing RedJapan 32-Button 08 Line 2 LED flashing RedJapan Economy 09 Line 1 and 2 LED flashing RedModel A Economy 10 Line 1 LED flashing GreenModel B Economy 11 Line 2 LED flashing GreenReserve 12 Line 1 and 2 LED flashing Green
