NEC VERSA 4000 Service Manual

Also see for VERSA 4000 BATTERY CHARGER WITH AC ADAPTER: Manual Manual Manual Manual

Contents

NEC VERSA 4000 Service Manual Manual pdf 39 page image

Setup and Operation 2-11Setup ScreenThe Setup screens have four main areas of information. These include: Top Line of the Screen — contains user-selectable menu options. Left Half of the Screen — provides current parameter information. Selecting a pa-rameter from the list (using the menu bar) toggles through selectable parametersettings. Right Half of the Screen — describes each parameter and the available settings. Bottom Line of the Screen — displays the keys that you can use to move the cur-sor or to select a particular function, such as saving parameters and exiting themenu.Setup KeysRefer to Table Section 2-5 for a description of Setup Key functions.Table Section 2-5 Setup Key FunctionsKey FunctionTab Moves cursor to another field in the menu. For example, pressingTab moves the cursor up or down a list of current parameters.Up or down arrow Selects fields in the current menu.Pg Up/Pg Down Moves to previous/next page on scrollable menus.- Selects lower/higher value.F9 Loads factory-installed Setup default values.F10 Restores previous values from CMOS.Esc Opens Exit screenEnter Selects the parameter sub menu.CHANGING/SETTING PARAMETER SETTINGSUse the following steps to set or change parameter settings:NOTE: Selecting incorrect values may cause asystem boot failure. Load Setup default values torecover.1. Select a parameter menu from the menu bar by moving the cursor to the wordthat represents the screen you want to display.