NEC VT37 User Manual
Also see for VT37: Supplementary guideControl commandsControl commandsSpecificationsInstallation guide
                                                                           | |
Contents
| 
253. Projecting an Image (Basic Operation) Optimizing RGB Picture AutomaticallyAdjusting the Image Using Auto AdjustOptimizing an RGB image automatically.Press the AUTO ADJ. button to optimize an RGB image automatically.[Poor picture][Normal picture]VOLUMES-VIDEOVIDEOL-CLICKMOUSER-CLICKAUTO ADJ.COMPUTERASPECT HELPFREEZEPICTURE12Press the AUTO ADJ. button to fine-tune the computer image or to remove any vertical banding that might appear andto reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer-ing). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function alsoadjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your imageappears to be shimmering.)This adjustment may be necessary when you connect your computer for the first time.NOTE:Some signals may not be displayed correctly or take time.• The Auto Adjust function does not work for component and video signal.• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Horizontal/Vertical Position Clock and Phasemanually. See pages 41 and 42. Turning Up or Down VolumeIncrease volumeDecrease volumeVOLUMES-VIDEOVIDEOL-CLICKMOUSER-CLICKAUTO ADJ.COMPUTERASPECT HELPFREEZEPICTURE12VIDEO S-VIDEOAUTOADJ.COMPUTER |
Related manuals for NEC VT37
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine