3MENUSELECTLAMPSTATUSPOWERON/STAND BYSOURCEAUTO ADJ.ENTEREXITFOCUSZOOM1. Introduction Part Names of the ProjectorFront/TopFOCUSMENUSELECTLAMPSTATUSPOWERON/STAND BY SOURCEAUTO ADJ.ENTEREXITZOOMZoom Lever (VT695/VT595/VT590/VT490/VT59)Digital Zoom Button (VT49)(→page 24)Controls(→page 5)LensLens CapBuilt-in Security Slot ( )*Focus Ring(→page 24)Remote sensor(→page 8)Ventilation (inlet) / Filter Cover(→page 50)Two filters on VT695, VT595, VT590and VT490One filter on VT59 and VT49AC InputConnect the supplied power cable's two-pin plug here, andplug the other end into an active wall outlet. (→page 19)Main Power SwitchWhen you plug the supplied power cable into an active wall outletand turn on the Main Power, the POWER indicator turns orangeand the projector is in standby mode.(→page 20,28)Remote sensor (VT695 and VT595 only)(→page 8)Terminal Panel(→page 6)Monaural Speaker(VT695/VT595: 5W)(VT590/VT490/VT59/VT49: 1W)* This security slot supports the MicroSaver ® Security System. MicroSaver ® is a registered trademark ofKensington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.Ventilation (outlet)Heated air is exhausted from here.RearFOCUSZOOM
