273. Projecting an Image (Basic Operation) Optimizing RGB Picture AutomaticallyAdjusting the Image Using Auto AdjustOptimizing an RGB image automatically.Press the AUTO ADJ. button to optimize an RGB image automatically.This adjustment may be necessary when you connect your computer for the first time.[Poor picture][Normal picture]VOLUMEL-CLICKMOUSER-CLICKASPECT HELPFREEZEPICTUREAUTO ADJ.S-VIDEOVIDEO COMPUTERLAMP MODE12Increase volumeDecrease volumeVOLUMEL-CLICKMOUSER-CLICKASPECT HELPFREEZEPICTUREAUTO ADJ.S-VIDEOVIDEO COMPUTERLAMP MODE12NOTE:Some signals may take time to display or may not be displayed correctly.• VT695/VT595: The Auto Adjust function does not work for component, video, and DVI digital signals.• VT590/VT490/VT59/VT49: The Auto Adjust function does not work for component and video signals.• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Horizontal/Vertical Position, Clock and Phasemanually. (→page 43) Turning Up or Down VolumeSound level from the speaker can be adjusted.TIP: When no menus appear, the SELECT and buttons on the projector cabinet work as a volume control.SELECTMENUENTEREXITLAMPSTATUSPOWERON/STAND BY AUTO ADJ.SOURCE
