NEC i-Series Gateway Quick Installation Manual
Also see for i-Series: ManualUser guideFeature handbookQuick reference guideQuick reference guide
                      | |
i-Series Gateway Page 16 G-6000G-SKE, Rev AATelnet ConnectionD
qpvYou can configure the i-Series Gateway using a Telnet session over the existing LAN connection. Amaximum of four Telnet connections can exist per unit at one time.IMPORTANT:• You must configure all IP parameters before you can establish a Telnet session to a unit.• The i-Series Gateway must be powered up and online. (See Power-up procedure on page 8.)Q
prq
r1. On a computer running Windows, open the Telnet application by selecting Start/Run from thedesktop.2. Enter Telnet command along with the IP address assigned to the unit. (See below.)Telnet address3. Click OK.The MI Welcome Screen is displayed. (See page 9.)HTML InterfaceIntroductionYou can configure the i-Series Gateway using a standard Web server over an existing LAN connection.This feature provides the system administrator complete management capabilities as well as statusinformation for both WAN and PORT connections.IMPORTANT:• You must configure all IP parameters for the i-Series Gateway before the Web server session can beestablished.• The i-Series Gateway must be connected to the LAN via the LAN port.• The i-Series Gateway must be powered up and online. (See Power-up procedure on page 8.)Procedure1. Access the MI using a Telnet session or via the Console Port. |
Related manuals for NEC i-Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine