12click Edit/Remove User.5. In the Action menu for the user you want to remove, select Delete.The user name is marked to be deleted when you save the changes on this page.6. If needed, mark other user accounts to delete, and then press F12 to save the changes andexit the system utilities.7. When prompted to confirm the changes, click Yes - Save Changes to exit the utility andresume the boot process.Logging in to iLO for the first timeProcedure1. Enter https://.HTTPS (HTTP exchanged over an SSL encrypted session) is required for accessing the iLOweb interface.2. Enter the default user credentials, and then click Log In.iLO default credentialsThe iLO firmware is configured with a default user name, password, and DNS name. The defaultinformation is on the serial label pull tab attached to the server that contains the iLOmanagement processor. Use these values to access iLO remotely from a network client by usinga web browser.• User name—Administrator• Password—A random eight-character string• DNS name—BMCXXXXXXXXXXXX, where the X characters represent the server serialnumber.IMPORTANT:NEC Corporation recommends changing the default password after you log in to iLO forthe first time.If you reset iLO to the factory default settings, use the default iLO account credentials tolog in after the reset.iLO licensed featuresiLO (Standard) is preconfigured on Express servers without an additional cost or license.Features that enhance productivity are licensed.To activate iLO licensed features, install an iLO license.
