NEFF S series Instruction Manual

Also see for S series: User manual User manual Instruction manual Instruction manual Instruction manual

NEFF S series Instruction Manual Manual pdf 12 page image

en Getting to know your appliance12Overview of menuThe dishwasher has been preset withcertain settings for your convenience.The settings can be found in theindividual chapters. You can changethese factory settings.Here’s how to change the settings:1. Switch on ON/OFF switch (.2. Press and hold the ‹ buttonfor 3 seconds.In the display window )" you willsee •:‹... and ‘ .3. Press the ‹ button to accessthe individual settings.4. Adjust the setting using the buttons+ and - P.5. Press and hold the ‹ buttonfor 3 seconds.The chosen setting has now beenstored in your dishwasher.Tip: If you want to change a number ofsettings, first make all your changes oneafter another. Then press the ‹button for 3 seconds. All the settingswill then be stored in the dishwasher.Setting up Factory setting Description• Water hardness•:‹‹ - •:‹ˆ•:‹… Setting water hardness. When usingMultitabs, select the lowest setting.§ Rinse aid§:‹‹ - §:‹‡§:‹† Amount of rinse aid affects drying. Whenusing Multitabs, select setting 0.†“ Sensor setting†“:‹‹ - †“:‹ƒ†“:‹‹ Adjustment of soiling detection foroptimum cleaning result.š ExtraDryš:‹‹ - š:‹‚š:‹‹ / Off Improved drying for glasses and plastictableware.‘ Hot water *‘:‹‹ - ‘:‹‚‘:‹‹ / Off The dishwasher can be connected toeither hot (40-60°C) or cold water(<40°C).˜ Auto Power Off˜:‹‹ - ˜:‹ƒ˜:‹‚ Appliance automatically switches off atthe end of each wash.“ EmotionLight *“:‹‹ - “:‹‚“:‹‚ / On Interior light.† TimeLight *†:‹‹ - †:‹‚†:‹‚ / On While a programme is running, statusinformation is projected onto the floor.‚ Infolight *‚:‹‹ - ‚:‹‚‚:‹‚ / On Light is projected to signal an activewashing cycle.* depending on the configuration of your specific dishwasher