NEFF S series Instruction Manual

Also see for S series: User manual User manual Instruction manual Instruction manual Instruction manual

NEFF S series Instruction Manual Manual pdf 50 page image

en Installation and connection50Drinking water connection1. Fasten the drinking water connectionto the tap accordingto the installation instructions usingthe enclosed parts.Ensure that the drinking waterconnection is not kinked, crushedor twisted.2. When replacing the appliance,always use a new water supplyhose.Water pressure:at least 0.05 MPa (0.5 bar), maximum 1MPa (10 bar).At a higher water pressure:connect pressure-reducing valve ahead.Inlet rate:minimum 10 litres/minuteWater temperature:cold water.Hot water:Maximum temperature 60 °C.Hot water connection *Hotwaterconnection * depending on the features of yourdishwasherThe dishwasher can be connected tocold or hot water up to max. 60°C.Connection to hot water isrecommended if the hot water can besupplied by energetically favourablemeans and from a suitable installation,e.g. solar heating system withcirculation line. This will save energyand time. The “Hot water” setting allowsyou to adjust your dishwasher optimallyto operate with hot water. It isrecommended to have a watertemperature (temperature of theincoming water) of at least 40 °C andno more than 60 °C. It is notrecommended to connect the applianceto hot water if the water is supplied froman electric boiler.Here’s how to change the hot watersetting:1. Switch on ON/OFF switch (.2. Press and hold the ‹ buttonfor 3 seconds.The value •:‹... and ‘ will appear inthe display window )".3. Press the ‹ button repeatedlyuntil the factory setting value ‘:‹‹appears in the display window )".4. Adjust the setting using the buttons+ and - P.5. Press and hold the ‹ buttonfor 3 seconds.The chosen setting has now beenstored in your dishwasher.

/ 52

Related manuals for NEFF S series