NRS Healthcare L71158 User Instructions

1USER INSTRUCTIONSNUVO SLATTED BATH / SHOWER BOARDSL71134 Bath Board 26½” (673 mm) L71146 Bath Board 27½” (698 mm)L71158 Bath Board 28½” (724 mm) L71169 Bath Board 30” (762 mm)L71171 Shower Board 26½” (673 mm) L71183 Shower Board 27½” (698 mmL71195 Shower Board 28½” (724 mm) L71274 Grab Handle (optional)General Safety WarningPlease make sure that you read and followthese instructions carefully. Keep theseinstructions in a safe place for future reference.Maximum User Weight30st190kg1. INTENDED USETo provide a safe seating or transfer platform for usewhen bathing or showering. It can be used on itsown or in conjunction with the NuvoTM Bath Seat toallow the user to sit lower in the bath.2. SAFETYWarning: The maximum user weight must not bemore than 190 kg (30 st).Check the bath seat fits correctly inside the bath.There should be a minimum of 1.5” (37 mm) of levelbath rim on each side to support the board.Ensure the wing nuts are tight and the clamps aresecure prior to use.Do not attempt to stand on the seat.3. UNPACKINGRemove the packaging and check all parts carefully.Contact your supplier immediately if parts aremissing or damaged and do not try and assemble.3.1 Contents:A. Bracket Pads x 8B. Bracket Locators x 4C. Wing Nuts x 44. ASSEMBLYACBPush the bracket pads (A) into the bracket locators(B).Screw the wing nut (C) through the central slot intothe corresponding screw thread to attach the clampbracket to the underside of the board.5. INSTALLATION1. Choose the desired position of the bath board.The optimum position is at the end opposite thetaps.2. Clean and dry the bath walls thoroughly in thearea where the board is to be fitted.3. Place the board across the top of the bath withthe brackets facing upwards and the edge of theboard in line with the edge of the bath.4. Slide one of the brackets such that the bracketpad is in line with the inside edge of the bath andsecure by tightening the wing nut.

/ 3

Related manuals for NRS Healthcare L71134