6SPECIFICATIONSPower Handling: 60W Peak (30W RMS)Speaker Impedance: 8 ohmWoofer: 8”Frequency Response: 100Hz to 220Hz (adjustable)Cabinet: Front-loaded, vented, painted finish. Bass-reflex loaded with 2” tuned cylindrical portMax SPL: 101dBInputs: Balanced XLR &Unbalanced ¼” (single combo jack)Required Voltage: 115VAC/60Hz (230VAC/50Hz—internally switchable by factory only)Fuse: 5x20mm glass tube F.B. 8A 250V @ 115VAC (4A 250V @ 230VAC)Dimensions (H x W x D): 12”x 9.75”x 18.5” (3.x500x560mm)Weight: 22.15lbs (10Kg)The specifications above are correct at the time of printing of this manual for improvementpurposes, all specifications for this unit, including the design and appearance, are subject tochange without prior notice.SERVICE FOR YOUR NADY AUDIO PRODUCTPlease do not return our product to the store where it was purchased. Nady Systems, Inc.assumes the responsibility of keeping you a satisfied customer.DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS ANDWILL ALSO VOID THE WARRANTY.If factory service is required, please call our Service Department at 510/652-2411 or e-mailservice@nady.com for a return authorization (RA) number. Make sure the RA number is clearlymarked on the outside of the package. If unit is past the One Year Warranty, The Nady ServiceDepartment will provide a quote for service or replacement. Please make sure a cashier’scheck or money order is enclosed (if not prepaid with credit card) with the shipment to Nady.If unit is within the One Year Warranty from purchase, please check Warranty terms for furtherinstruction before sending in unit.Nady Systems will not repair nor be held responsible for any units sent without properidentification and return address or RA number clearly marked on the package.For service, please ship units prepaid to:Nady Systems, Inc., Service Department, 6701 Shellmound St., Emeryville, CA 94608