N&W Global Vending Colibri UL 120V Use And Installation Manual
                                                    | |
Contents
| 
24© by N&W GLOBAL VENDING SpA 02-2007 266 00MACHINE CONFIGURATIONWhen the “Machine Config.” function is displayed, themachine configuration can be changed, and namely:- cup dispensing / without cup (for automatic models)- water supply from the mains or from the tank- presence of the equipped base cabinet- fast cycles ON / OFF- coffee grounds tray ON / OFFPress the confirm button “ ” to display the current status;when pressing the change button “ ” the data item startsblinking and can be changed with the “ ” and “ ” buttons.IMPORTANT NOTICE!!!When initialising the machine, the configuration takeson the default values.THEREFORE, AFTER INITIALISING THE MACHINEMUST BE RECONFIGURED.When the “fast cycles” function is enabled, some of thetime that is useful for improving the drink quality is elimi-nated.Instant selections- All of the products that compose the drink are dis-pensed at the same time.- the “post-whipping” time is eliminated.Espresso selections- Pre-brewing of ground coffee is not performed.- the pump, used to increase the boiler pressure after aninstant drink selection, is not started;- the “post-whipping” time is eliminated.SELECTION COUNTERThis function is used to lock the machine after a program-mable number of coffee selections, and a programmablenumber of instant selections; alternatively, the machinecan be locked after a programmable number of selections.Since this is a control tool used only by the vendingoperator, a 4-digit password must be entered.After entering the password, it is possible to set the numberof selections after which the machine locks, read thenumber of selections already made and reset the lockcounter.N.B.: The counters are set to zero by default.With the counters set to zero, this function is disabled.SETTING THE PROMOTIONAL MESSAGEWhen this menu is displayed, press the confirm button “ ”to display whether or not the message is enabled (disabledby default).If the message is enabled, when pressing the confirmbutton “ ” the first character will start blinking and can bechanged.The buttons will take on the following functions:1 - Go to the next character2 - Go to the previous character3 - Upper case/lower caseThe values are displayed alternately by pressing thebutton sequentially.The message is stored by pressing button “2” when on thelast position.LANGUAGE SELECTIONThis function is used to select the language to be used fordisplaying the messages.WHIPPING TIMEThis function is used to define how long (in tenths of asecond) instant coffee is to be whipped according to theamount of drink to be obtained.PROGRAMMING ACCESS PASSWORDThis function is used to enable the request for a passwordto access the programming procedures.The password is the button sequence 1 1 2 2 and cannotbe changed.SELECTION CONFIGURATION(for automatic models only)This function is used to determine, as an exception to themachine configuration, which accessories should or shouldnot be dispensed for a specific selection.The following is possible for each selection button (1 to 8,excluding the pre-selection buttons):- not dispense the cup (if the machine configurationincludes the cup, but not vice versa);- not dispense the stirrer if the selection is unsweet-ened;- not dispense sugar and stirrer for selections which aredefined as sweetened (but not dispense sugar forselections which are defined as unsweetened).The settings defined with the selection configuration areused also for complete test selections.Fig. 25 |
Related manuals for N&W Global Vending Colibri UL 120V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine