N&W Global Vending Colibri UL 120V Use And Installation Manual
                                                    | |
Contents
| 
Programming menu summaryThe machine can function in 3 different operating modes:- Normal vending mode- Maintenance Menu- Programming menuIn order to access the programming menus, press the pro-gramming button located on the inside of the door.The buttons shown in the figure are used for surfingthrough the different menus:Fig. 311 - Programming access button© by N&W GLOBAL VENDING S.p.A. 31 02-2007 266 00Fig. 32When pressing the programming button, the machine goesinto “Maintenance menu” mode.SCROLLING BUTTONS UP ( ) AND DOWN ( )The UP and DOWN scrolling buttons are used for movingfrom one programming menu item to the next one, locatedin the same level, and at the same time change the statusor the numeric value of the corresponding functions.CONFIRM / ENTER BUTTON ( )The confirm / enter button is used for moving to the lowerlevel or for confirming a value after being entered orchanged.EXIT BUTTON ( )The exit button is used for returning to the higher level orfor exiting a change field of a function. When reaching thehighest level in the menu, this button is pressed for goingfrom the Programming menu into the Maintenance menuand vice versa.INSERTING THE VALUESWhen the control software requests the entry of lettersand/or numbers the buttons take on the following func-tions:The confirm button “ ” is for changing / entering the firstcharacter, then for confirming it and going to the next char-acter.The “ ” and “ ” buttons are for scrolling through the avail-able values.After entering the values, press the confirm button “ ” andthe display will show the message “Confirm?”; press againthe confirm button to store the values. |
Related manuals for N&W Global Vending Colibri UL 120V
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine