ENW415-1299 / B / 06.16.14196.5 MOTOR REPLACEMENTA. To access the 2 screws holding the motor, removethe reflector. Pull the reflector out from the adaptorto release the reflector and pull the adaptor fromthe motor.B. Unplug the quick connect motor wire from the wireharness.C. Remove the 2 screws holding the motor and takethe motor out of the unit.6.6 CONTROL BOARD REPLACEMENTA. To prevent stripping of the plastic plugs on the back of the control board, hold the plugs with plierswhile removing each of the 4 screws.B. Unplug all the wires connected on the control board.ADAPTORREFLECTORMOTOR
