W415-0702 / B / 04.04.12102.4 GENERAL INFORMATIONThank you for purchasing a Wolf Steel Ltd. Pellet Appliance. This appliance is designed for use with PelletizedWood Only.Please read this entire manual before installation and use of this pellet fuel-burning room appliance. Failure tofollow these instructions could result in property damage, bodily injury or even death.Keep this manual handy for future reference.This Pellet Appliance, when installed, must be electrically grounded in accordance with the local codes, or inthe absence of local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA70 National Electrical Code in the United States.This appliance will not operate using natural draft or without a power source for the blower systems and fuelfeed system.The protective wrap on plated parts is best removed when the assembly is at room temperature but this can beimproved if the assembly is warmed, using a hair dryer or similar heat source.If the appliance is installed directly on carpeting, vinyl tile or other combustible material other than woodflooring, the appliance shall be installed on a metal or wood panel extending the full width and depth.4.5If the fuel does not comply tothis standard the appliance maynot operate as designed.We recommend the use of pre-mium grade (1% ash content)for longer appliance life and lessfrequent cleaning.Fines (fine particles) 1% maximum through a 1/8" screenBulk Density 40 pound per cubic foot minimumSize 1/4" to 5/16" diameter, 1/2" - 1 1/2" long maximumAsh Content 1% maximum (Premium grade)3% maximum (Standard grade)Moisture Content 8% maximumHeat Content Approximately 8200 BTU per pound minimumP.F.I. PELLET STANDARDS:Pellet quality is important, please read the following:Your Wolf Steel Ltd. Pellet Appliance has been designed to burn premium hard or soft wood pellets only. Donot use any other type of fuel such as fire logs or fire starting pellets, as this will void the warranties stated inthis manual.The performance and heat output of the pellet appliance is directly related to the quality and moisture of thepellets. Store pellets in a cool dry area to prevent moisture absorption.64.1! WARNINGIT IS IMPORTANT TO SELECT AND USE ONLY PELLETS THAT ARE DRY AND FREE OF DIRT OR ANYIMPURITIES SUCH AS HIGH SALT CONTENT. DIRTY FUEL WILL ADVERSELY AFFECT THE OPERA-TION AND PERFORMANCE OF THE APPLIANCE AND WILL VOID THE WARRANTY. THE PELLETFUEL INSTITUTE (P.F.I.) HAS ESTABLISHED STANDARDS FOR WOOD PELLET MANUFACTURERS.WE RECOMMEND THE USE OF PELLETS THAT MEET OR EXCEED THESE STANDARDS. ASK YOURDEALER FOR A RECOMMENDED PELLET TYPE.2.4.1 PELLET SPECIFICATIONS