Napoleon NZ7000 Installation And Operating Instructions Manual

Also see for High Country NZ7000: Installation and operation manual Quick start guide Installation and operating instructions

Contents

Napoleon NZ7000 Installation And Operating Instructions Manual Manual pdf 21 page image

W415-1676 / B / 10.26.1721EN30 9/16"(77.6cm)**81 1/4"(206.4cm) *96"(243.8cm)MIN.60"(152.4cm)STEEL STUD* Allow for finished floor and hearth thickness when setting these dimensions.** When constructing the enclosure allow for finishing material thickness and to maintain clearances.5.0 FRAMINGIN ORDER TO AVOID THE POSSIBILITY OF EXPOSED INSULATION OR VAPOUR BARRIER COMINGIN CONTACT WITH THE APPLIANCE BODY, IT IS RECOMMENDED THAT THE WALLS OF THEAPPLIANCE ENCLOSURE BE “FINISHED” (I.E.: DRYWALL / SHEETROCK), AS YOU WOULD FINISHANY OTHER OUTSIDE WALL OF A HOME. THIS WILL ENSURE THAT CLEARANCE TOCOMBUSTIBLES IS MAINTAINED WITHIN THE CAVITY.DO NOT BUILD SHELVES OR CUPBOARDS INTO THE AREA ABOVE THE APPLIANCE.OBJECTS PLACED IN FRONT OF THE APPLIANCE MUST BE KEPT A MINIMUM OF 48" (121.9cm)AWAY FROM THE FRONT FACE OF THE APPLIANCE.NOTE : Use metal studs wherever non-combustible facing is required.