W415-1676 / B / 10.26.1736EN8.4 STARTING A FIRE (DAMPER OPEN)Remove all sources of gasoline or other flammable vapours and liquids in the vicinity of this or otherappliances prior to lighting.Use Solid wood, processed solid fire logs (or other specified type) fuel only.WARNING: Do not build fire too close to door glass. Do not poke or stir the logs while they are burning. Useonly firelogs that have been evaluated for the application in fireplace and refer to firelog warnings and cautionmarkings on packaging prior to use.Use plenty of newspaper and kindling to ensure the appliance quickly reaches a proper temperature. Once thekindling is burning rapidly, place a few larger pieces of wood onto the fire.Tip: When first lighting a fire, if the smoke is not quickly drawn into the chimney, there may be a downdraft or cold airin the chimney. By first burning large amounts of crumpled newspaper, the chimney will get heated and the smoke willquickly vent up the chimney.ALWAYS OPERATE THIS APPLIANCE WITH EITHER THE GLASS DOOR OR SPARK SCREENCLOSED. AFTER RE-FUELING, ALWAYS CLOSE EITHER THE GLASS DOOR OR THE SPARKSCREEN. ALWAYS WEAR GLOVES TO PREVENT INJURY.NEVER LEAVE CHILDREN UNATTENDED WHEN THERE IS A FIRE BURNING IN THE APPLIANCE.NEVER USE GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILARLIQUIDS TO START OR “FRESHEN UP” A FIRE IN THIS APPLIANCE. KEEP ALL SUCH LIQUIDS WELLAWAY FROM THE APPLIANCE.THIS APPLIANCE HAS NOT BEEN TESTED WITH ANY VENTED OR UNVENTED GAS LOG SET. TOREDUCE RISK OF FIRE OR INJURY, DO NOT INSTALL A VENTED OR UNVENTED GAS LOG SET INTO THISAPPLIANCE.A. To start, a brisk fire is required.Roll up some newspaper(loosely crumpled), light it andplace it near the appliance flueuntil the chimney begins todraw.B. Cover with dry kindling. C. Light the paper and when thekindling is burning add more fuel.Draft is the force which moves air from the appliance up through the chimney. The amount of draft in your chimneydepends on the length of the chimney, local geography, nearby obstructions and other forces.Inadequate draft may cause back-puffing into the room and may cause plugging of the chimney. Too much draft maycause an excessive temperature in the appliance, glowing red appliance parts or an uncontrollable burn which canall lead to a chimney fire or a permanent damage to the appliance.• Max fuel load 60lbs (27kg).• Max fuel height, halfway up the firebox or to the top of the first firebrick.MAX FUEL HEIGHTMAX FUEL HEIGHT