National Instruments CVS-1459RT Getting Started Manual

Also see for CVS-1459RT: User manual

Contents

National Instruments CVS-1459RT Getting Started Manual Manual pdf 2 page image

2 | ni.com | NI CVS-1459RT Getting Started GuideRequired ComponentsThe following items are necessary to set up and use the NI CVS-1459RT: NI CVS-1459RT device One or two USB3 Vision cameras One USB 3.0 cable per USB3 Vision camera One CAT 5 10/100Base-TX, CAT 5e, or CAT 6 1000Base-T Ethernet cable to connect thedevice to the development computer or to a network.Note A CAT 5e or CAT 6 1000Base-T Ethernet cable is required to achieve1,000 Mbps (Gigabit) Ethernet performance. CAT 5e and CAT 6 Ethernet cablesadhere to higher electrical standards required for Gigabit Ethernet communication.CAT 5 cables are not guaranteed to meet the necessary requirements. While CAT 5cables may appear to work at 1,000 Mbps, CAT 5 cables are likely to cause bit errorsresulting in degraded network performance. Development computer running Microsoft Windows. Refer to the driver or applicationdevelopment software readme for specific Windows version compatibility. A compatible power supply, such as the NI PS-15 Power Supply (part number 781093-01)Optional EquipmentNational Instruments offers the following products for use with the NI CVS-1459RT: 24 VDC, 1.25 A Desktop Power Supply (part number 782032-01) 44-pin D-SUB cable for digital I/O• 44-pin D-SUB male to pigtail cable (part number 156083-03 for 3 meter cable)• 44-pin D-SUB male to 44-position D-SUB female cable (part number 156084-03 for3 meter cable or part number 156084-0R5 for 0.5 meter cable) NI CVS I/O AccessoryNote This accessory is unshielded.• CVS I/O Accessory and 3 meter 44-pin D-SUB male to 44-position D-SUB femalecable (part number 783327-01)• CVS I/O Accessory and 0.5 meter 44-pin D-SUB male to 44-position D-SUB femalecable (part number 783328-01)