Chapter 1 DAQ System OverviewE Series User Manual 1-6 ni.comSCCSCC is a front-end signal conditioning system for E Series plug-in dataacquisition devices. A SCC system consists of a shielded carrier that holdsup to 20 single or dual-channel SCC modules for conditioningthermocouples and other transducers. SCC is designed for smallmeasurement systems where you need only a few channels of each signaltype, or for portable applications. SCC systems also offer the mostcomprehensive and flexible signal connectivity options.System features include:• Modular architecture—Select your measurement technology on aper-channel basis• Small-channel systems—Condition up to 16 analog input and eightdigital I/O lines• Low-profile/portable—Integrates well with other laptop computermeasurement technologies• High bandwidth—Acquire signals at rates up to 1.25 MHz• Connectivity—Incorporates panelette technology to offer customconnectivity to thermocouple, BNC, LEMO ™ (B Series), and MILSpec connectors5B Series5B is a front-end signal conditioning system for plug-in data acquisitiondevices. A 5B system consists of eight or 16 single-channel modules thatplug into a backplane for conditioning thermocouples and other analogsignals. National Instruments offers a complete line of 5B modules,carriers, backplanes, and accessories.Note For more information about SCXI, SCC, and 5B series products, refer to ni.com/signalconditioning.Cables and AccessoriesNI offers a variety of products to use with E Series devices, such as:• Cables and cable assemblies, shielded and ribbon• Connector blocks, shielded and unshielded 50- and 68-pin screwterminals• RTSI bus cables
