National Instruments NI TSM-1012 User Manual
                  | |
Contents
| 
6. Follow the onscreen instructions. Touch the screen at the five specified points tocalibrate.Enabling the Embedded UI on NI Linux Real-TimeThe NI TSM-101x monitor requires a USB connection for touch-screen modality on NI LinuxReal-Time targets.Note NI Linux Real-Time does not support RS-232 touch screen modality.Use a USB cable to connect the monitor to the target and complete the following steps toenable touch screen modality.Installing the Touch Panel Driver on NI Linux Real-Time1. Install the recommended software set on the target.a) In MAX, expand Remote Systems in the configuration tree, then expand the RTtarget by clicking the arrow beside it.b) Select Software.c) Click Add/Remove Software at the top of the Software tab to launch the LabVIEWReal-Time Software Wizard.d) Select a recommended software set to install. Click Next. MAX displays installationprogress, and restarts the target.2. Select the Enable Embedded UI checkbox in MAX.a) Expand Remote Systems in the configuration tree, then select the RT target.b) Place a check in the Enable Embedded UI checkbox.c) Click Save, then select Yes when prompted to restart the target.Calibrating the Touch Screen on NI Linux Real-TimeThe touch screen may be out of calibration on first use. Visit ni.com/info and enter the InfoCode CalibrateTouchScreenLinuxRT for information about calibrating theNI TSM-101x touch screen on an RT target.Connecting the NI TSM-101x to PowerCaution You must use a UL Listed ITE power supply marked LPS with theNI TSM-101x.Wiring the Terminal BlockConnect the leads of the 9 to 36 V DC power supply into the terminal block.Caution To ensure the specified EMC performance, the length of all power wiringmust not exceed 3 m (10 ft).Use wire that meets the requirements in the device specifications. Attach the power andground wires to the correct sockets of the connector as shown in the following figure.Connect earth ground to the grounding electrode system of your facility using a methodappropriate for the application.6 | ni.com | NI TSM-101x User Manual |
Related manuals for National Instruments NI TSM-1012
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine