National Instruments PXIe-5745 Getting Started Manual

Contents

National Instruments PXIe-5745 Getting Started Manual Manual pdf 12 page image

Figure 7. PXIe-5745 Block DiagramEXTERNAL REF/SCLKCLK IN SMADAC38RF82Dual 12-bit, 6.4 GS/sANALOG OUTPUTAO0 SMAAC (Balun)Coupled PathOptionalAnti-Image FilterAdapter ModuleConnectorCLOCKINGAO1 SMAAC (Balun)Coupled PathOptionalAnti-Image FilterComponent-Level Intellectual Property (CLIP)The LabVIEW FPGA Module includes component-level intellectual property (CLIP) for HDLIP integration. FlexRIO devices support two types of CLIP: user-defined and socketed.• User-defined CLIP allows you to insert HDL IP into an FPGA target, enabling VHDLcode to communicate directly with an FPGA VI.• Socketed CLIP provides the same IP integration of the user-defined CLIP, but it alsoallows the CLIP to communicate directly with circuitry external to the FPGA. Adaptermodule socketed CLIP allows your IP to communicate directly with both the FPGA VIand the external adapter module connector interface.The PXIe-5745 ships with socketed CLIP items that add module I/O to the LabVIEW project.Making a MeasurementMaking a Measurement with LabVIEW1. Launch LabVIEW.2. Select Help»Find Example.3. Open the example VI that you want to use by selecting Hardware Input and Output»FlexRIO.4. Follow any setup, configuration, and execution instructions in the VI.12 | ni.com | PXIe-5745 Getting Started Guide