National Mower I-TRIM Owner's Manual

Also see for I-TRIM: Owner's manual

Contents

National Mower I-TRIM Owner's Manual Manual pdf 11 page image

I-TRIM®111.1—ENGINE SPECIFICATIONSTYPE: 3 cylinder turbocharged DieselENGINE MODEL: Briggs & Stratton954 DTHORSEPOWER: 34 hpCOOLING: Water cooled1.2—TRANSMISSIONTRACTION DRIVE: Oilgear variableDisplacementHydrostatic pumpWHEEL DRIVE Char Lynn hydraulic motorsMOTORS: with disc-parking brakes1.3—STEERINGEaton PowerSteering Control Unit1.4—MOWER SPECIFICATIONSFUEL TANK: 10 Gallons (38 liters)OIL TANK: 12 Gallons (45 liters) Approx.TIRES: Front: 16 x 6.50 - 8 (28 psi max)(May be shipped with 2 gal RimGuard Ballast)Rear: 23 x 10.50 x 12 (20 psi max)FRAME: Welded steel constructionMOWING SPEED: 0 - 7 MPH (0 - 11.3 km)CONTROLS: Foot operated traction pedal for forwardand reverse, hand operated throttleconttrol, electric valve for cutting units,and hand operated parking brake.1—SPECIFICATIONSBATTERY TYPE: Exide Model 60 PremiumType 78-6012 V side post7 3/16 (18 cm) height6 ¾ (17 cm) width10 1/4 (26 cm) length1.5—CUTTING UNIT SPECIFICATIONSCUTTING UNIT: (3) - 26” (.66m) wide decksBLADES: (2) Right hand 26” (.66 m) wide blades(1) Left hand 26” (.66m) wide bladeDECK MOTORS:(2) CCW Hydraulic motors (Right/Rear)(1) CW Hydraulic motor (Left)Rotation direction as viewed from bottom of deckWIDTH OF CUT: 70” (1.778m)HEIGHT OF CUT: 1.5” to 4” adjustment (38.1mm to101.62mm)1.6—LUBRICANTSENGINE OIL: Refer to enclosed Engine ManualHYDRAULIC OIL: ISO 68 hydraulic grade oil.1.7—OTHERROPS: Roll over protective structuremeets SAE J 1194 standards