Nautel XR12 Operation And Maintenance Manual

Also see for XR12: Installation manual Troubleshooting manual Preinstallation manual

XR12 Operations and Maintenance Manual Operating the transmitterPage 2-4 Issue 3.1 2013-03-14Automation Control Turn automatic functions on and off. page 2-9Change Meter Groups Choose the digital meters to display in the GUI. page 2-13Software Version View software version information. page 2-19Real Time Clock View or set the transmitter’s clock. page 2-16LCD Contrast Setting Change the contrast of the LCD screen. page 2-20Hardware Settings Navigate to Set Thresholds, Calibrate Meters,Calibrate Analog Meters, and Factory Settingspages.page 2-21Calibrate Meters Calibrate the digital meters available in the GUI. page 2-24Set Thresholds Change the thresholds that protect thetransmitter.page 2-22Calibrate Analog Meter Calibrate the analog meter located on the frontof the transmitter.page 2-25Set High Power Lockout Limit Enable the high power lockout feature andchange the high power lockout limit.page 2-26Factory Settings Restore factory settings. page 2-25Configure NxLink Configure the address information for theoptional NxLink Ethernet interface module.page 2-29Table 2.1: GUI PagesGUI Page Function See Page