Nautel XR12 Operation And Maintenance Manual

Also see for XR12: Installation manual Troubleshooting manual Preinstallation manual

XR12 Operations and Maintenance Manual Using the event logIssue 3.1 2013-03-14 Page 3-1Section 3: Using the event logThis section provides information about using and interpreting the XR12’s event log. The event logrecords key information such as setting changes, faults, and commands. You may wish to review theevent log to check the transmitter’s status, perform troubleshooting, or review recent changes totransmitter controls.This section includes the following topics:• Viewing the event log• Clearing the event log - see page 3-6• Event log messages - see page 3-7Viewing the event logTo view the XR12’s log, select Events Log from the GUI’s Main Menu. (See “Graphic user interface”on page 2-2.) The Events Log page appears on the XR12’s LCD screen.Figure 3.1: Events Log pageThe Events Log page shows a list of recent faults and other events. The second line of the pageshows the total number of events in the log, the number of alarms, and the index number of the eventthat is currently highlighted.Press the Up and Down buttons to scroll through the event list. Press the Alarms Onlybutton to limit the list to alarms (hiding other event notifications).Press the All Events button to view all events in the log.10:18 0.00kW M-1 PM:AB Man Ex:A ManEvents:411 Alarms:272 Selected:00124Oct06 10:48:43 LVPS Fault24Oct06 10:44:23 Command RF OFF24Oct06 10:44:23 Command Manual Power24Oct06 10:44:23 B+ Relays Closed24Oct06 10:44:21 B+ Relays OpenAlarms Only View Event Back10:18 0.00kW M-1 PM:AB Man Ex:A ManEvents:411 Alarms:272 Selected:00124Oct06 10:48:43 LVPS Fault24Oct06 10:44:23 Command RF OFF24Oct06 10:44:23 Command Manual Power24Oct06 10:44:23 B+ Relays Closed24Oct06 10:44:21 B+ Relays OpenAlarms Only View Event Back