User's manual NAVIGON 20 EASY | 20 PLUSBefore you begin - 13 -Inserting the navigation device into the cradleOn the back of the navigation device you will see a circle with tworecesses.1. Hang the navigation device by the upper recess on the upper lug ofthe cradle. (See illustration)2. Then press it towards the cradle so that it latches in place.2.4.3 Supplying power to the navigation deviceIncluded in delivery of the navigation device is a car charger cable withwhich power can be supplied to the navigation device via the vehicle'scigarette lighter.► Connect the car charger cable to the vehicle's cigarette lighter andto the mini USB socket of the navigation device.The LED on the bottom of the navigation device lights up orange duringcharging.As soon as the battery is fully charged, the LED lights up green.Caution! Connect the car charger cable only to cigarette lighters withan operating voltage of 10-24V.Note: It takes approx. 3 hours to charge the device when the battery isflat.A fully charged battery enables up to 2 hours of use depending on thedevice configuration.TMC antennaThe navigation device has an integrated TMC receiver. The TMCantenna is integrated in the car charger cable. Once the car chargercable is connected, the device can receive current traffic messages. If
