User's manual NAVIGON 20 EASY | 20 PLUS- 16 - Switching on the navigation deviceNote: If you have not used the navigation device for a long time, thebattery may be flat.When you connect the navigation device to the supplied car chargercable, it can be switched on immediately even if the battery is flat. If youuse a different charger cable or have connected your device to a PC, itmay need charging for approx. 3 minutes before it can be switched on.Chargers and other accessories are available in the NAVIGON onlineshop at www.navigon.com or in specialist stores.Switching the navigation device to standby mode► Press briefly on the (On/Off) key (max. 2 seconds).A message will appear telling you that the device will be switched tostandby mode in several seconds.► Wait for the device to be switched to standby mode or tap onStandby.Automatic StandbyYou can configure the navigation device so that it is automaticallyswitched to standby mode when not in use.► In the N AVIGATION window tap on Options > Settings > General >Automatic Standby.► Select after how much time you want the navigation device to beswitched to standby mode (Never, After 10 mins., After 20 mins.,After 30 mins.).► Select Power Loss in order to switch the device to standby modewhen the external power supply is interrupted. As soon as thedevice is connected again to the external power supply it will switchon again automatically.Switching off the navigation device1. Press briefly on the (On/Off) key (max. 2 seconds).A message will appear telling you that the device will be switched tostandby mode in several seconds.2. Tap on Off.
