User's manual NAVIGON 20 EASY | 20 PLUSNavigation - 41 -The S AVED ROUTES AND TRACKS list opens. It shows all the savedroutes and tracks in alphabetical order.A symbol in front of the name indicates whether it is a route ( )or a track ( ).If you want to load a route:2. Tap on the route that you want to load.3. Tap on (Load Route).The ROUTES AND TRACKS window opens. The starting point and theroute points of the loaded route have been entered. For the routecalculation the starting point is replaced by the current position. Youwill now be guided to the first route point.If you want to load a track:4. Tap on the track that you want to load.5. Tap on Load Track.The ROUTES AND TRACKS window opens. The current location isentered as the starting point. The loaded track is entered as routepoint 1. Navigation then leads first to the starting point of the track.For details about navigating along recorded tracks refer to chapter"Navigation in Track mode" on page 59.5.4.6 Calculating and displaying routesIt is possible to calculate and display a planned route on the map evenwithout GPS reception in order to get an impression of the journey.The ROUTES AND TRACKS window is open. The starting point and atleast one route point have been entered.► Tap on Show Route.The map opens in Preview mode.The starting point and the route points are marked by flags. Thedistance and the estimated trip time is given for each leg of theroute.5.4.7 Simulating routesIt is also possible simply to simulate navigation on a planned route.Note: GPS reception is not necessary for simulation.If you have planned a multi-leg route, only the first leg will be simulated.You have calculated and displayed a route.
