Necta Korinto UL 120V Installation, Use And Maintenance Manual

Necta Korinto UL 120V Installation, Use And Maintenance Manual Manual pdf 34 page image

© by N&W GLOBAL VENDING SpA 30 07 06 275- 00PRINTED BOARD FUNCTIONSAND INDICATOR LAMPSACTUATION BOARDThis board, placed at the back of the machine, (see Fig. 26)processes the information from the push-button card andfrom the payment system; it also controls the actuations,the input signals and the boiler board.The 15 V AC voltage required for board operation issupplied by a transformer which is protected by a T1.6 Afuse on the primary and by a T1.25 A fuse on the secondarywinding. The voltage supply is rectified and stabiliseddirectly by the board.This board houses the Flash EPROM. The control soft-ware of the board is installed directly (via RS232 or UpKey)in the microprocessor.- the red LED (7) indicates the operating status of the boilerheating element;- the red LED (9) for resetting the CPU glows during theboard reset;- the green LED (11) blinking indicates that the microproc-essor is working correctly;- the yellow LED (12) indicates the presence of 5 V DC.YALER WERBHSERF1K MP2K DESUTON3K 1FM4K DESUTON5K 4VE6K 3VE7K DESUTON8K DESUTON9K BFVE01K 1DM11K 2VE21K DESUTON31K DESUTON41K AEE51K DESUTON61K 2DM-CAMFig. 261 - Main switch2 - Mains fuse3 - Boiler control board4 - Brewer control board5 - Actuation/CPU board6 - Transformer fuses7 - TransformerFig. 271 - 120 V~ users2 - Input signal3 - Can-Bus connection4 - Can-Bus connection5 - Relay expansion connection6 - Boiler control probe7 - Red LED - boiler heating element8 - Input signal9 - Red LED10 - Not used11 - Green LED12 - Yellow LED13 - To the push-button board14 - Connector for board programming (RS232)15 - UpKey connector16 - Board power supply (15Vac)17 - Relays K1÷K1618 - 120 V~ users