Nederman FlexPAK 800 Setting Manual

Also see for FlexPAK 1000: Installation and service manual User manual

Nederman FlexPAK 800 Setting Manual Manual pdf 12 page image

FlexPAK 800/1000EN123.1.8 Close Upper Slide Valve V12The message appears when the TVFD Upper Solenoid Valve is expected to close. Thetimer is set with TVFDC-Al, see Section ‘4.2.26 TVFD-Al-Tmr’. If the timer elapses, the‘TVFD Alarm! Upper Slide Not Closed is activated. This message is only shown when TVFDadvanced is activated.ESC OKClose UpperSlide ValveRemaing time08:00sRemaining Time: The remaining time for the valve to close before thealarm is activated.3.1.9 Emptying bin TVFD AdvancedThe message appears when the TVFD Lower Solenoid Valve is expected to open. The timeris set with TVFDC-Al, see Section ‘4.2.26 TVFD-Al-Tmr’. If the timer elapses, the ‘TVFDAlarm! Lower Slide Not Open is activated. This message is shown when TVFD advanced isactivated. TVFD-Al is only activated when using TVFD advanced.ESC OKEMPTYING BINOpen LowerSlide ValveRemaing Time02:00sRemaining Time: The remaining time for the valve to open before thealarm is activated.3.1.10 Close Lower Slide Valve V11The message appears when the TVFD Lower Solenoid Valve is expected to close. Thetimer is set with TVFDC-Al, see Section ‘4.2.26 TVFD-Al-Tmr’. If the timer elapses, the‘TVFD Alarm! Lower Slide Not Closed is activated. This message is only shown when TVFDadvanced is activated.ESC OKClose LowerSlide ValveRemaing time05:00sRemaining Time: The remaining time for the valve to close before thealarm is activated.3.1.11 Flushing ductThe unit is flushing the duct system. This message is shown when FlushCy1 and FlushCy2activate the flush valve. This message is also shown when FlushTemp is activated, seeSections ‘4.2.30 FlushCy1’, ‘4.2.22 FlushCy2’ and ‘4.2.24 FlushTmp’.ESC OKFlushingDuctsCycl 1 03:00 sCycl 2 05:00 sCycl1: The time remaining for the flush cycle with the flush valve 1(SFV1).Cycl2: The time remaining for the flush cycle with the flush valve 2(SFV2).