9-1DG 410/412 Emulation9DG 410/412 EmulationThis chapter describes the Data General D410/412 terminal emulation.Session ConfigurationWBT ModeThis section describes the basic procedure for creating a session configuration whenthe terminal is in WBT mode. The options available are described in detail in chapter2.1. Click the Configure tab in the Terminal Connection Manager then click theAdd button to display the New Connection dialog box.2. Select Terminal Emulation Client and click OK. The Terminal EmulationClient Connection Wizard - Connection Information dialog box will bedisplayed.3. Enter a name which will identify this session configuration for future selection inthe Connection Name box.4. Select the DG 410/412 terminal emulation in the Emulation list box. Thisemulation provides compatibility with software designed to drive the DataGeneral D410/412 terminal.5. Click Next to display the Host Information dialog box.For a TCP/IP connection, click the TCP/IP button, enter the name or internetaddress of the host computer in the Host Name box, then click Advanced foradditional Telnet options. Refer to the TCP/IP Connection Settings section inchapter 2 for details.For a modem connection, click the Modem button then click Advanced todisplay configuration options. Refer to the Modem Connection Settings section inchapter 2 for details.
