10-13HP 700-92/96 EmulationWhen data received from the host or entered through the keyboard reaches thespecified right margin, the cursor will move to the left margin on the next line down(as long as InhEolWrp is not selected in the HP Settings dialog box and, in the caseof keyboard-entered data, auto line feed mode is enabled).To specify the right margin, place the cursor in the column for the margin locationand click this button or press F6. The right margin can be reset to column 80 bypressing F7 (this will also reset the left margin to column 1).Note: Margins are disregarded when data is transferred fromdisplay memory to the host. The margins will be clearedwhen Format mode is enabled.Clr All Margins- F7This function will reset both left and right margin settings so that the left margin is incolumn 1 and the right margin in column 80.Key ProgrammingThe keys F1 through F8 and their equivalent buttons can be programmed by the hostor user to perform additional functions to those described in the previous section. Thekeys may be assigned a string of alphanumeric characters and/or control codes, andyou can define whether the key string is executed locally or transmitted to the host, orboth. The buttons can also be programmed to display the new functions when in UserKeys mode.User Keys mode is entered by pressing the F10 key. The f-key buttons displayed onthe screen will change to display the current User Key definitions. If no definitionshave been assigned, either by you or the host, the buttons will just display the legendsof each f-key as shown below.To define the function of an f-key or equivalent button locally, press the keys Shift +F10 to display the User Key Definition menu as shown overleaf. The menu can beexited by pressing F9.Default DefinitionsWhile this menu is displayed the f-keys and equivalent buttons have the functionsshown by the buttons at the bottom of the window, so pressing F4 or the DefaultValues button will cause the default key and button definitions to be asserted. Thedefault definitions will take effect once the User Key Definition menu is exited.
