Netopia R5100 User Reference Manual

Also see for R5100: Specifications User reference guide

Contents

Netopia R5100 User Reference Manual Manual pdf 56 page image

7-6 User’s Reference GuideEEEEaaaassssyyyy SSSSeeeettttuuuupppp PPPPrrrrooooffffiiiilllleeee ssssccccrrrreeeeeeeennnnThe Easy Setup Profile screen appears.The Easy Setup Profile screen is where you configure the parameters that control the Netopia R5000 SeriesRouter’s connection to a specific remote destination, usually your ISP or a corporate site.On a Netopia R5000 Series Router you can add up to 15 more connection profiles, for a total of 16, althoughyou can only use one at a time.1. To enable address translation, toggle Address Translation Enabled to Yes (the default). For moreinformation on Network Address Translation, see Chapter 9, “IP Setup and Network Address Translation,”on page 9-1.2. You can toggle IP Addressing to either Unnumbered (the default) or Numbered.3. Select the Local WAN IP Address field. The default address is 0.0.0.0, which allows for dynamicaddressing, when your ISP assigns an address each time you connect. However, you may enter anotherspecific address if you want to use static addressing. In that case, enter the local WAN address your ISPgave you.When using numbered interfaces, the Netopia Router will use its local WAN IP address and subnet mask tosend packets to the remote router. Both routers have WAN IP addresses and subnet masks associatedwith the connection.When using unnumbered interfaces, the Netopia Router will use either its local Ethernet IP address or itsNAT address (if so configured) and subnet mask to send packets to the remote router. Neither router has aWAN IP address or subnet mask associated with this connection.4. If you chose Frame Relay as your datalink encapsulation method, select Frame Relay Management Typeand from the pop-up menu choose ANSI (Annex D), CCITT (Annex A), LMI, or None. ANSI (Annex D) is thedefault.Connection Profile 1: Easy Setup ProfileConnection Profile Name: Easy Setup ProfileAddress Translation Enabled: YesIP Addressing... UnnumberedRemote IP Address: 127.0.0.2Remote IP Mask: 255.255.255.255Frame Relay Management Type... ANSI (Annex D)PREVIOUS SCREEN NEXT SCREENEnter basic information about your WAN connection with this screen.