Easy Setup 7-7If you chose PPP as your datalink encapsulation method, select PPP Authentication and from the pop-upmenu choose: None (the default), PAP, CHAP, PAP-TOKEN, or CACHE-TOKEN. Selecting any authenticationmethod other than the default None will display fields for you to enter your authentication information, suchas User Name and Password.5. Select NEXT SCREEN and press Return. The IP Easy Setup screen appears.Note: For more Easy Setup options, see the next section. For more Frame Relay configuration options see“Configuring Frame Relay” on page 8-6.IIIIPPPP EEEEaaaassssyyyy SSSSeeeettttuuuuppppThe IP Easy Setup screen is where you enter information about your Netopia Router’s: Ethernet IP address Ethernet Subnet mask Domain Name Domain Name Server IP address Default gateway IP addressConsult with your network administrator to obtain the information you will need. For more information aboutsetting up IP, see “IP Setup and Network Address Translation” on page 9-1.1. Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has givenyou. This will be the Netopia Router’s IP address.If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Addressdefaults to an address within a range reserved by the Internet address administration authority for usewithin private networks, 192.168.1.1.IP Easy SetupEthernet IP Address: 192.168.1.1Ethernet Subnet Mask: 255.255.255.0Domain Name:Primary Domain Name Server: 0.0.0.0Default IP Gateway: 0.0.0.0IP Address Serving: OnNumber of Client IP Addresses: 1001st Client Address: 192.168.1.100PREVIOUS SCREEN NEXT SCREENEnter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).Set up the basic IP & IPX attributes of your Netopia in this screen.
