12-10 User’s Reference GuideState: Displays the state of the specified route, based on the frequency of Routing Table Maintenance Protocol(RTMP) packets received for the route. The state can be Good, Suspect, or Bad. AppleTalk routers regularlyexchange RTMP packets to update AppleTalk routing information.Next Rtr Addr.: Displays the DDP or IP address of the next hop for the specified route. A DDP address isdisplayed if the router shown is on the local AppleTalk network. DDP address means that a connection to thenext-hop router is by a native AppleTalk network (e.g.: LocalTalk or EtherTalk Phase II). An IP address isdisplayed if the Netopia R9100 is connected to the router shown using AURP. IP address means a connectiontransports over AURP (AppleTalk encapsulated IP).Pkts Fwded: The number of packets sent to the router shown.Served IP AddressesYou can view all of the IP addresses currently being served by the Netopia R9100 Ethernet Router from theServed IP Addresses screen.From the Statistics & Logs menu, select Served IP Addresses. The Served IP Addresses screen appears.To manage DHCP leases, select Lease Management in this screen.Served IP Addresses-IP Address-------Type----Expires--Client Identifier------------------------------------------------------------SCROLL UP-----------------------------------192.168.1.100 DHCP 00:36 EN: 00-00-c5-4a-1f-ea192.168.1.101 DHCP 00:58 EN: 08-00-07-16-0c-85192.168.1.102192.168.1.103192.168.1.104192.168.1.105192.168.1.106192.168.1.107192.168.1.108192.168.1.109192.168.1.110192.168.1.111192.168.1.112192.168.1.113---------------------------------SCROLL DOWN----------------------------------Lease Management...EN = Ethernet Address; AT = AppleTalk Address; CP = Profile Name; HX = hex
