WAN and System Configuration 8-7You can set the Idle timeout duration to be greater or less than the default 300 seconds (five minutes).When you are finished with these entries, press Escape to return to the Add Connection Profile screen.9. Select ADD PROFILE NOW and press Return. Your new Connection Profile will be added.If you want to view the Connection Profiles in your router, return to the WAN Configuration screen, andselect Display/Change Connection Profile. The list of Connection Profiles is displayed in a scrolling pop-upscreen.Default Answer Profile for Dial-in ConnectionsThe Netopia R9100 Ethernet Router can answer calls on the Auxiliary port. To answer calls, the Netopia R9100uses a Default Answer Profile. The Default Answer Profile controls how incoming calls are set up, authenticated,filtered, and more.How the Default Answer Profile worksThe Default Answer Profile works like a guard booth at the gate to your network: it scrutinizes incoming calls.Like the guard booth, the Default Answer Profile allows calls based on a set of criteria that you define.The main criterion used to check calls is whether they match one of the Connection Profiles already defined.The default profile checks that the incoming call’s name and password match the receive name and passwordof a Connection Profile.If an incoming call is matched to an existing Connection Profile, the call is accepted. All of that ConnectionProfile’s parameters, except for authentication, are adopted for the call.You could set up the Default Answer Profile to allow calls in even if they fail to match a Connection Profile.Continuing the guard booth analogy, this would be like removing the guards or having them wave all calls in,regardless of their source.WAN Configuration+-Profile Name---------------------IP Address----IPX Network-++------------------------------------------------------------+| SmartStart Profile 127.0.0.2 || Profile 02 0.0.0.0 || || || || || || || || || || || || || || |+------------------------------------------------------------+Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
