8-12 User’s Reference GuideFilter sets (firewalls)These screens allow you to configure security on your network by means of filter sets and a basic firewall. Details are given in “Security” on page 13-1.IP address servingThese screens allow you to configure IP address serving on your network by means of DHCP, WANIP, BootP, andwith the optional AppleTalk kit, MacIP. Details are given in “IP address serving” on page 9-16.Date and timeYou can set the system’s date and time in the Set Date and Time screen.Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screenappears.Follow these steps to set the system’s date and time:1. Select Current Date and enter the date in the appropriate format. Use one- or two-digit numbers for themonth and day, and the last two digits of the current year. The date’s numbers must be separated byforward slashes (/).2. Select Current Time and enter the time in the format HH:MM, where HH is the hour (using either the12-hour or 24-hour clock) and MM is the minutes.3. Select AM or PM and choose AM or PM.Console configurationYou can change the default terminal communications parameters to suit your requirements.Set Date and TimeSystem Date Format: MM/DD/YYCurrent Date (MM/DD/YY): 12/9/1998System Time Format: AM/PMCurrent Time: 04:18AM or PM: PM
