13Locate the Problem:- Select your 300x Printer from the list.- Configure with Page Setup.- Select the Quick Print.- Locate the Wide Band on the Quick Print.Get Started:STEP 1: Select the box(es) on the grid that correspond to the problem shown on the Quick Print.Selecting the box will insert a start value of 0 for the samples you will create. Keep the defaultvalue of 0. Advanced users might use a different start value.NOTE: You may select one or multiple colors for the current die/band.NOTE: To Unselect any box, delete its value.NOTE: You can click on the die number at the top to select all colors at once.Figure 14. STEP 1 of Die Level AdjustmentClick in the grid box. A start valueof 0 is automatically inserted.Or, click on the number above thegrid for all colors.
