www.newrocktech.com 4-334.3 Configuring the IP PhonesFor New Rock NRP IP phone, the default configuration file is generated on the OM, and downloaded tothe phones through plug and play procedure described above. Other than achieving special features, there is noneed to configure the phone individually.For a phone that is not a New Rock NRP phone, registration information must be entered. Thefollowing describes the registration information using the NRP1012 as an example.Step 1 Open the Web management interface of the IP phone, click VOIP > SIP, select the desired SIPline, and then enter the registration information in Basic setting.Item DescriptionServer AddressEnter the IP address or dynamic domain name of the OM.For Example : 192.168.111.41Server portEnter the SIP listening port of the OM. The default port is 5060.Note: By default, the SIP listening port of the device and the SIP trunk share aport, that is, port 5060. You can set a different registration port on theExtension > IP> Registrar OPTIONS.AuthenticationUser Enter the number of the IP extension that is set in the OM. For example: 213.AuthenticationPasswordEnter the password corresponding to the number of the extension. Forexample: the password corresponding to the number 213 is 8240051.
