Lighting Instructions continuedIGNITE / ON12OFF Make sure the lid is open.Push and slowly turn the Rear Burner knob to IGNITE/ONposition. Keep knob pressed in until the burner is lit. Onceit is lit, continue to press and hold for another 15 seconds toensure the burner stays lit.If burner does not light within 5 seconds, turn the knob toOFF position and repeat the lighting procedure.If burner fails to light after step 3, turn the knob to OFFposition, wait 5 minutes, then repeat the lighting procedureor light by match.1231. If the burner will not light after several attempts then the burner can be match lit, before using the matchallow 5 minutes for any accumulated gas to dissipate.2. Clip a paper match on one end of the lighting rod.3. Light match.4. Hold lighting rod and insert lighted match right next to the burner ports or ceramic tile.5. Push and turn the designated control knob to IGNITE/HIGH.6. Burner should ignite immediately.Match light4Main burnerRear burner27Side burner