GEO M6 HARDWARE SETUP PROCEDURE Page 29/624 to 12 (maximum) GEO M6 ceiling mounted8.3.3Required items- 1 x GMT-BUMPER- 4 to 12 x GMT-BNFIX- 4 x 8mm diameter screws (not provided)IMPORTANTEnsure that the ceiling is strong enough to hold GEO M6 cluster weight and that thefour screws 8 mm diameter and corresponding plugs required to fix the bumper underthe ceiling are properly dimensioned.Procedure- 8mm diameter screws (not provided) are required to fix the GMT-BUMPER to the ceiling;- Connect the bumper to top cabinet by inserting the GMT-BNFIX axis through front holes and secureaxis and rear link with GMT-BNFIX screws;- Connect subsequent cabinets with GMT-BNFIX at required inter-angle values;NB: please note that top cabinet angle will be 0° in relation to the bumper
