Nidec Leroy Somer Powerdrive MD2SL Series Installation And Maintenance Manual

Nidec Leroy Somer Powerdrive MD2SL Series Installation And Maintenance Manual Manual pdf 18 page image

18MECHANICAL INSTALLATIONPowerdrive MD2SL Installation and maintenance5077 - 2017.12 / ben2.4 - DimensionsThe cabinet-mounted POwERDRIVE MD2SL solution is obtained by assembling cabinet modules of 400 or 600 mm wide and600 mm deep.The table below gives the product width (w in mm) and height (H in mm) depending on the options fitted:OptionsRatings HeightH (mm) Switch High-speedfuses RFI filter Mainschoke DC choke Brakingtransistorwidthw (mm)180T to 470T 2100  included 606    included  1006570T 2300 included included - 606 included  included -  1006750 & 900T 2100  included 1206    included  18061100T 2300 included included - 1206 included  included -  18061400T & 1700T 2300 (1)  included - 1806   included -  2406 (1)340TH to 600TH 2300  included - 606   included -  1006750TH to 1200TH 2300  included - 1206   included -  18061500TH & 1800TH 2300 (1)  included - 1806   included -  2406 (1)The following options can be fitted into thePOwERDRIVE MD2SL without affecting its dimensions:• MD-AU1 emergency stop• Communication modules• Additional I/O modules• Speed feedback modulesThe table below gives the product height (H) depending onthe options fitted:Option Height (mm)IP21 protection + 0IP54 protection + 100100mm baseplate + 100200mm baseplate + 200baseplate for width ≥ 2400mm (1) + 100(1) For width of 2400mm and above. a 100 mm highbaseplate must be installed to ensure the rigidity of thecabinet assembly. Cables cannot run through this baseplate.but a 100mm ou 200mm baseplate can be added.For more details depending on the options chosen. use theLeroy-Somer configurator:http://configurateurls.leroy-somer.com/2.5 - weightThe values indicated in the table below are maximum netweights.Rating weightwithout option (kg)Maximum weight(kg)180T to 270T 335 570340T to 470T 360 570570T 380 990750T and 900T 720 10401100T 745 12501400T 1265 15501700T 1450 2100340TH 360 570400TH and 600TH 400 620750TH and 1200TH 820 10801500 TH 1250 15201800TH 1450 2100HW D = 600 mm