Niigata seiki LS2-S170AD Instruction Manual
Also see for LS2-S170AD: Instruction manualInstruction manual
 | |
Contents | 
Cover DimmingAC Adapter jackrearLensViewable Area~Clamp Range~ toArmUpper~Lower~AC AdapterPlugClampArm CoverMakes work easy - Hands free; Well lit; Wide view.Thank you for purchasing the LS2-S170AD Arm Type Magnifier.Please read this manual thoroughly before use to insure proper operation and longservice.BEFORE USE Read and Follow for Safe Use of ProductWARNINGCAUTIONCARE &STORAGENOTESSPECIFICATIONSTo prevent electrical shock, always make sure the power is OFF and unplugthe AC Adapter before assembly or attaching/detaching lens or cleaning theequipment.Never look at sun or bright light through the lens. There is risk of damage toeyesight.Do not expose lens to sunlight or intense light, there is risk of starting fire.Never leave lens in location where it can be exposed to direct or reflectedsunlight. Close the lens cover when not in use in order to prevent starting fire.Keep hands from moving parts on the arm. There is risk of pinching fingersand injury.Only use with the provided AC Adapter.Handle with Care. Do not drop, scratch, or use strong force with product.(Use special care when cleaning.) Mishandling may lead to productdamage and injury.Do not place the lens in water or rinse with water to clean. Water in longcontact with lens may cause mold or cloudiness.This product contains metal bearing surfaces and may produce traceamount of dust and powder due to repeated friction on metal surfaces.Therefore, it is not suitable for clean-room applications. If there is concernover exposing workpiece to contamination, do not use for that applicationor take care not to reposition light while above workpiece.The clamp may scratch the desk surface and the movement of the lightmay cause scratches on the top of the desk. To prevent, place a protectivesheet or board between desk and clamp surface.Do not move the arm or lens housing beyond its limits. If overextended, thelight may tilt and cause damage or accident.Please keep lens clean of dust and fingerprints.Clean lens gently with soft cloth. Do not wash with abrasive cleaners, orrinse with water.Keep lens protection cover in down position, and unplug AC Adapter whennot in use for extended period.PART NAMES, DIMENSIONSHOW TO USEFor best results, and to prevent eye fatigue, adjust the Arm so that the Lens is parallel tothe surface you wish to inspect, and securely tighten the Clamp.※ The best lens position will depend on distance between eyes and the workpiece.To use the Light, Plug the AC adapter into the Power Jack and press the PowerSwitch to turn on power.※ Position unit so that external lights, such as the ceiling fixtures, are not reflected inthe lens.Light power is controlled by using the buttons to adjust dimming.After use, close the lens protection cover, turn off the PowerSwitch, and unplug the AC adapter from the power source.Please Note: Due to product enhancements, appearanceand specifications are subject to change without notice.Power SupplyPowerBulbColor Temp.Luminous PowerAC AdapterMain Unit MassArm LengthAC Adapter included~72x White~ daylight~ t o lumenCord Length~~Upper ~ , Lower ~TypeWhite Glass LensMagnification~ 2xViewable Area~HeadArm SteelArm CoverCoverPolycarbonateAC Adapter, Clamp,Lens ClothLensMaterialAccessoriesLED ARM MAGNIFIER Instruction ManualLens ProtectiveCoverArm Clamptouch controltouch controlPower,Niigata Seiki Co., Ltd.5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055+81-256-33-5522 FAX : +81-256-33-5518M A I L : i n t l . s a l e s @ n i i g a t a s e i k i . c o . j pU R L : h t t p : / / w w w . n i i g a t a s e i k i . c o . j p |
Related manuals for Niigata seiki LS2-S170AD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine