E101Reference SectionFailed to save 3D imageThe camera failed to save the 3D image.• Try shooting again.• Delete images.• 3D images may not be able to be created and saveddepending on the shooting conditions, such as when thesubject is moving, dark, or low in contrast.4432–Lens errorLens is not operating properly.Turn camera off and then on again. If error persists, contactretailer or Nikon-authorized service representative.22Communications error Error occurred during communication with printer.Turn camera off and reconnect USB cable. E30System errorError has occurred in camera’s internal circuitry.Turn camera off, remove and reinsert batteries, and turncamera on. If error persists, contact retailer or Nikon-authorized service representative.14, 23Printer error: checkprinter status.Printer error.Check printer. After solving the problem, select Resume andthen press the k button to resume printing.*–Printer error: checkpaperSpecified size of paper is not loaded in printer.Load the specified size of paper, select Resume, and thenpress the k button to resume printing.*–Printer error: paper jamPaper has jammed in printer.Remove the jammed paper, select Resume, and then pressthe k button to resume printing.*–Printer error: out ofpaperNo paper is loaded in printer.Load the specified size of paper, select Resume, and thenpress the k button to resume printing.*–Display Cause/Solution A
