F8Technical Notes and IndexTroubleshootingIf the camera fails to function as expected, check the list of common problems below beforeconsulting your retailer or Nikon-authorized service representative.Power, Display, Settings IssuesProblem Cause/Solution AThe camera is on but doesnot respond.• Wait for recording to end.• If the problem persists, turn the camera off.If the camera does not turn off, remove and reinsertthe battery or batteries or, if you are using an ACadapter, disconnect and reconnect the AC adapter.Note that although any data currently beingrecorded will be lost, data that have already beenrecorded will not be affected by removing ordisconnecting the power source.–14, 15, 23,E95Camera turns off withoutwarning.• Battery is exhausted.• Camera has turned off automatically to save power.• The camera and batteries have become too coldand cannot operate properly.2298, E81F4Monitor is blank.• Camera is off.• Battery is exhausted.• Standby mode for saving power: press the powerswitch, the shutter-release button, A button,c button, or b (e movie-record) button.• The flash lamp flashes while the flash is charging.Wait for the flash to charge.• Camera and computer are connected via USBcable.• Camera and TV are connected via audio/videocable or HDMI cable.23222, 235580, 8580, E27