E6Reference Section3 With the subject aligned with the guide, wait for the camera toautomatically release the shutter and capture the second shot.• The camera automatically takes the second picture when it detects that the subject isaligned with the guide.• Shooting is canceled if the subject is not aligned with the guide within about ten seconds.Connecting the COOLPIX L810 to a TV or Monitor and Viewing 3D Images• 3D images captured on this camera can be played back in 3D only on a 3D-compatible TVor monitor.• 3D images cannot be played back in 3D on the camera monitor. Only the left eye image ofa 3D image is displayed during playback.1 Set HDMI 3D output (E61) to On (default setting) in TV settings inthe setup menu (A 88).2 Connect the camera to a 3D-compatible TV or monitor using a 3D-compatible HDMI cable (E17).• Refer to the documentation included with the TV or monitor for details on how to make thesettings.B Notes About Viewing 3D Images• 3D Images cannot be used with playback zoom.• It may take a while to display images when switching between 3D images and non-3D images.• A 3D-compatible HDMI cable is required to play back 3D images in 3D on a 3D-compatible TV ormonitor via HDMI connection.• Set HDMI (E61) in TV settings in the setup menu (A 88) to Auto (default setting) or 1080i. Ifyou select 480p or 720p, images cannot be played back in 3D and 3D playback cannot beselected.• When viewing 3D images on a 3D-compatible TV or monitor for an extended period of time, youmay experience discomfort such as eye strain or nausea. Carefully read the documentationincluded with your TV or monitor to ensure proper use.
