E64Reference SectionEye-Fi UploadSet whether or not the camera’s Eye-Fi card (available from third-party manufacturers) sendsimages to your computer.d button M z tab M Eye-Fi upload M k buttonOption Descriptionb Enable Images created with this camera will be uploaded to the pre-determinedcomputer.c Disable(default setting) Images will not be uploaded.B Notes About Eye-Fi Cards• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.• When using the camera in an area where wireless signal output is not permitted, set this feature toDisable.• Refer to the instruction manual of your Eye-Fi card for more information. In the event ofmalfunction, contact the card manufacturer.• The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.• The camera is not compatible with the Endless Memory function. When it is set on a computer,disable the function. If the Endless Memory function is enabled, the number of pictures taken maynot be displayed correctly.• The Eye-Fi upload feature is intended for use only in the country of purchase. Before using it inother countries, refer to laws and regulations of that country.• When this setting is set to Enable, the battery will be drained faster than normal.C Eye-Fi Upload IndicatorThe upload status of the Eye-Fi card in the camera can be confirmed on the monitor (A 6, 8).• w: Eye-Fi upload is set to Disable.• x (lights): Eye-Fi upload enabled; waiting for image upload.• x (flashes): Eye-Fi upload enabled; uploading images.• y: Eye-Fi upload enabled but no images available for upload.• z: An error occurred. The camera cannot control the Eye-Fi card.
