E58Reference SectionAuto OffIf no operations are performed for a specified amount of time, the monitor turns off and thecamera enters standby mode to save power (A 22).This setting determines the amount of time that passes before the camera enters standbymode.d button M z tab M Auto off M k buttonOption DescriptionAuto off You can select 30 s (default setting), 1 min, 5 min, or 30 min.Sleep modeIf On (default setting) is selected, the camera will enter standby mode when thereis no change in the brightness of the subject, even before the time selected in theauto off menu has elapsed. The camera will enter sleep mode after 30 secondswhen Auto off is set to 1 min or less, or after 1 minute when Auto off is set to 5min or more.C When the Monitor Has Turned Off to Save Power• When the camera is in standby mode, the power-on lamp flashes.• If no operations are performed for approximately another three minutes, the camera will turn offautomatically.• When the power-on lamp is flashing, pressing any of the following buttons will turn the monitorback on:➝ Power switch, shutter-release button, A button, c button, or b (e movie-record) buttonC Notes About Auto Off• The time that passes before the camera enters standby mode is fixed in the following situations:- When a menu is displayed: 3 minutes- During slide show playback: Up to 30 minutes- When the AC adapter EH-67 is connected: 30 minutes• The camera will not enter standby mode while the Eye-Fi card is uploading images.Downloaded from www.Manualslib.com manuals search engine
