F9Technical Notes and IndexDate and time of recordingare not correct.• If camera clock has not been set, “Date not set”indicator flashes during shooting and movierecording. Images and movies saved before clock isset are dated “00/00/0000 00:00” or “01/01/201200:00” respectively. Set the correct time and datefrom the Time zone and date option in the setupmenu.• Check camera clock regularly against moreaccurate timepieces and reset as required.16, 88,E47No indicators displayed inmonitor.Hide info is selected for Photo info.Select Show info. 88, E51Print date not available. Time zone and date has not been set. 16, 88,E47Date not imprinted onimages even when Printdate is enabled.• The current shooting mode is one that does notsupport Print date.• The date cannot be imprinted on movies.88, E53Screen for setting time zoneand date is displayed whencamera is turned on. Clock battery is exhausted; all settings were restoredto their default values. 16, 19Camera settings reset.Camera becomes hot.The camera may become hot when shooting moviesor uploading images from an Eye-Fi card for anextended period of time, or when the camera is usedin a hot area; this is not a malfunction.–Problem Cause/Solution ADownloaded from www.Manualslib.com manuals search engine
